Top 10 Toyota 4Runner Upgrades, Ranked by Value

Top 10 Toyota 4Runner Upgrades, Ranked by Value

The most common 4Runner mistake is spending the first thousand dollars on looks or height and the next thousand fixing what that created. A 4Runner is already a capable body-on-frame truck, and the upgrades that pay off are the ones that fix a specific weakness: grip, underbody protection, recovery, and a suspension that can carry your real load. So what are the best 4Runner mods? Start with tires, add skid plates and recovery gear, tune the suspension to your weight, and leave the bumper, winch, and locker for last.

This is a ranked list by value: what each upgrade changes, what it costs you in tradeoffs, and who should skip it. If you want a month-by-month plan instead, read our 4Runner build guide. This list is the shorter version: ten picks, ranked, with the reasoning shown. These are types of upgrades rather than endorsements of one product, so they apply whichever generation you drive.

Dark 4Runner with a roof rack climbing a grassy dirt hill near a mountain lake
A stock 4Runner gets surprisingly far; the upgrades below make sure it keeps getting back. Photo: Blake Carpenter / Unsplash.

The quick-pick list

  1. Tires — the biggest single change in grip, comfort, and capability.
  2. Skid plates and underbody protection — cheap insurance for the parts that strand you.
  3. Recovery gear and an air compressor — turns a stuck truck into a ten-minute delay.
  4. Shocks and a measured lift — matching the suspension to the weight you actually carry.
  5. Rock sliders — protect the rocker panels that every 4Runner owner eventually dents.
  6. Auxiliary lighting — real light for night trails, if it is aimed properly.
  7. Roof rack and rooftop gear — useful, as long as the roof load math is done first.
  8. Rear locker or gearing — fixes specific problems, not general ones.
  9. Steel bumper and winch — serious protection with a serious weight penalty.
  10. Cargo storage — keeps gear secured and the cabin usable on long trips.

How we ranked these

We ranked each upgrade on three questions: how much it changes what the truck can do, how likely it is to prevent an expensive failure, and how many other parts it forces you to change. An upgrade that helps on every trip and creates no side effects ranks high. One that solves a narrow problem or adds weight everywhere ranks low, even if it looks great in photos. Your own trails will move things around, but this order holds up for most owners.

1. Tires

Tires are the only part of the truck that touches the ground, so they change traction, braking, ride quality, and ground clearance more than anything else you can bolt on. For most 4Runner owners, a good all-terrain tire in a size that fits without cutting is the single best first upgrade. A mud-terrain adds grip in soft ground but costs you road noise, wet-pavement manners, and fuel economy.

Tradeoff: a larger tire raises the truck's effective gearing, so it can feel sluggish and hunt for gears. Skip it if: your current tires have plenty of tread and you rarely leave pavement. Our 4Runner tire size guide covers what fits stock, leveled, and lifted, and you can browse wheels and tires to compare options.

Close-up of rugged all-terrain tire tread with deep blocks and sipes
Tread depth and sidewall strength matter more than the size printed on the tire. Photo: Rob Wingate / Unsplash.

2. Skid plates and underbody protection

The parts that strand a 4Runner are underneath it: the oil pan, transfer case, fuel tank, and steering linkage. Factory plates vary by trim and are usually thin sheet metal meant to deflect gravel, not survive a rock strike. Replacing or adding plates is cheap compared with a cracked pan or a punctured tank, and it works on every trip.

Tradeoff: steel plates add weight low in the truck, which is the best place for it, but they can also hide leaks and trap mud. Skip it if: you only drive graded roads. See what armor a 4Runner needs and what to buy first, or browse armor.

3. Recovery gear and an air compressor

Recovery gear is the cheapest way to turn a stuck truck into a ten-minute delay instead of a tow bill. At minimum that means a rated recovery strap or kinetic rope, soft shackles, traction boards, a shovel, and a way to air your tires back up. A compressor matters because airing down is free traction, but airing back up without one is slow and tiring. Buy rated hardware, learn the safe anchor points on your truck, and never pull from a tow ball.

Tradeoff: it takes space and a little practice. Skip it if: you never travel alone or off a maintained road, though even then a strap is worth the room. Start with the recovery gear checklist, compare offroad air compressors, and browse traction boards and straps and shackles.

4. Shocks and a measured lift

The factory suspension is tuned for a lightly loaded truck on pavement. Add a bumper, a rack, and a week of camp gear, and the rear sags and the ride gets floaty. Better shocks, and springs matched to your actual load, restore control and comfort before you add any height. A modest lift can then make room for larger tires, but it brings alignment, driveline, and headlight-aim side effects.

Tradeoff: a lift changes the geometry, so budget for an alignment and possibly new parts. Skip it if: your current tires fit and the truck rides level. Read offroad shocks explained and the 4Runner lift kit guide before you buy, then browse suspension.

Close-up of an offroad shock absorber and control arm mounted above a large tire
Shocks do the real work in a suspension; springs only set the ride height. Photo: Tyler / Unsplash.

5. Rock sliders

The rocker panels are the lowest, most exposed body panels on the truck, and a single rock can dent them in a way no body shop makes invisible. Sliders bolt to the frame and take that hit instead, and some double as a place to jack from. They also help when you slide sideways off a ledge.

Tradeoff: they add weight and can reduce breakover clearance if they hang low. Skip it if: your trails are smooth and wide. Compare them with other armor in our rock sliders guide.

6. Auxiliary lighting

Factory headlights are fine on the road and thin on a dark trail. A pair of pods or a light bar adds usable light where you need it, to the sides and close to the bumper. The key is aiming and a proper switch and relay, because a poorly mounted light blinds oncoming drivers and glares off your own hood.

Tradeoff: more light is not more visibility in dust, rain, or snow. Skip it if: you rarely drive trails after dark. Read how to light a night trail, then browse offroad LED lights.

7. Roof rack and rooftop gear

A roof rack gives you somewhere to carry recovery boards, a fuel can, or a rooftop tent without losing cabin space. It is also where weight does the most damage: it raises the center of gravity, adds wind noise, and costs fuel economy. The number that matters is the roof's dynamic load rating, which is far lower than the static rating, so check your owner's manual and the rack maker's limit before you load it.

Tradeoff: height and drag on every drive, including the commute. Skip it if: your gear fits inside. Our roof racks and payload guide walks through the weight math, and you can browse roof racks.

White 4Runner with a rooftop tent and rear-mounted spare tire parked in the desert
A rooftop tent turns the roof into a bedroom, and also into the heaviest thing on the truck. Photo: R Chang / Unsplash.

8. Rear locker or gearing

A locker and a gear change solve narrow problems. A locker helps when one rear wheel loses traction on a steep, loose, or off-camber climb, and some 4Runner trims already come with one, so check what yours has before spending money. Regearing helps when bigger tires have left the truck feeling slow and the transmission hunting. Neither one improves a truck that does not have the problem.

Tradeoff: labor is significant, and a locker changes how the truck steers on pavement. Skip it if: you have not yet met the limit of good tires and airing down. See lockers vs. limited slip vs. open and regearing after bigger tires, or browse gearing.

9. Steel bumper and winch

A steel bumper protects the front end and gives you a place to mount a winch and rated recovery points. It is also the heaviest single upgrade on this list, and all of that weight hangs ahead of the front axle, where it loads the springs and changes the ride. A winch only makes sense if you will actually learn to rig it.

Tradeoff: weight, cost, and often an extra suspension upgrade to carry it. Skip it if: you drive with others and carry a good strap. Compare bumper types by use case and winch types, then browse bumpers and winches.

Rear of an SUV with a bumper-mounted spare tire and red fuel can on a sandy trail
Bumper-mounted spares and fuel cans are convenient, and they all add weight behind the axle. Photo: Jeff James / Unsplash.

10. Cargo storage

Loose gear is a safety problem as much as an annoyance. A drawer system, a cargo organizer, or a simple set of bins keeps recovery gear, tools, and food where you can reach them and where they cannot fly forward in a stop. Good storage also protects the cabin from mud and fuel smells, and it makes the truck easier to repack every trip.

Tradeoff: drawers cost cargo height and add weight. Skip it if: your gear already rides tied down and tidy. Browse storage organizers.

Who should skip most of this list

If your 4Runner is a daily driver that sees a few graded dirt roads a year, tires and a recovery kit are a complete answer. Every upgrade here adds weight, cost, or maintenance, and a stock 4Runner is already a capable machine. Upgrade for a problem you have actually run into, not for a trail you might drive someday.

A sensible order to buy in

Buy tires first, then protection, then recovery gear and a compressor. Tune the suspension to your real load before you chase height. Add sliders, lighting, and a rack as your trips demand them. Leave the bumper, winch, locker, and gearing for last, when a specific need justifies the expense. Each step teaches you what the next one should be.

Frequently asked questions

What is the first mod to do on a Toyota 4runner?

Tires. They change grip, ride, and clearance more than any other part, and a good all-terrain in a size that fits is the best value for most owners. Skid plates and a basic recovery kit come right after.

Does a 4Runner need a lift kit?

Not unless you need room for larger tires or your trails demand more clearance. Many owners get better results from new shocks and tires without lifting, which avoids alignment and driveline side effects.

Are skid plates worth it on a 4Runner?

Yes, if you drive rocky or uneven trails. Factory plates are usually light, and an oil pan or fuel tank repair costs far more than good plates and an afternoon of installation.

How much weight can a 4Runner roof rack carry?

It depends on the generation and the rack, so check your owner's manual and the rack maker's limit. The load rating while driving is much lower than the rating while parked, which matters if you carry a tent.

Ready to build

Start with the parts that change how the truck drives and protect what is expensive to fix. Browse suspension and wheels and tires to start your 4Runner build, and add the rest as the trail shows you what is missing.

Related reading

Leave a comment