This Tacoma bed rack system from Toyota will ensure you show up ready for anything. The Tacoma bed rack is compatible with Toyotas from 2005-2023 and with its low profile, multiple mounting, and tie-down points, there is literally nothing this bed rack can’t handle. Engineered by American designers and laser cut here in the USA, this bed rack is press broke and welded to perfection, providing a seamless fit without sacrificing quality. Allowing you to take all your gear on your next overland trip.
To protect from corrosion, these are professionally powder-coated in a durable black semi-gloss mini texture to defend against damage and corrosion. With 80% of the construction being aluminum, this translates into lightweight, incredibly sturdy, and low maintenance.
PLEASE SEE MORE INFORMATION IN THE TABS BELOW
Approximate weight capacity: 1,100lbs
See the report on extrusion bars' weight limit performance ( DEFLECTION REPORT ). This provides all the technical data for the extrusion which is the "weakest link" in the bed rack, though they are not weak at all! Running the simulation for 1000lbs on a 53" extrusion supported on each end. Our bed rack mounts them in the Deflection Y configuration. This is 1000lbs applied to a single bar at the weakest point in the center and it shows a deflection of 0.195" and no failure.
NOTE:
We do not have a full analysis of our bed rack run through a simulation at this time, however, you can see that our rack can handle quite a bit of weight. Many customers run a large RTT up top with hi lifts or gas or recovery boards along the sides along with 360 degrees of lighting.
- This product was designed to specifically fit the 2005 to 2023 Toyota Tacomas
- We cannot guarantee fitment on any other products unless otherwise specified.
- Includes hardware for installation.
Choose from our different height options and bed lengths!
- 7” - Short
- 10” - Mid
- 17.5” - Tall
