The most common Colorado tire mistake is picking a size off a forum thread without checking which Colorado it was written about. So what size tires fit a Chevy Colorado? Most stock-height trucks take a tire around 30 to 31 inches in diameter without trouble. A leveling kit or small lift opens the door to 32 and 33 inch tires with light trimming at most, and 35s need a real lift, a wheel that clears the front suspension, and a plan for gearing. The right stopping point depends on your trim, your wheel, and what you ask the truck to do.
Start with your generation and trim
The Colorado has been sold in more than one generation, and trims such as the Z71, Trail Boss, and ZR2 sit at different heights, with different wheels, tires, and suspension hardware. A ZR2 has a wider track and factory fender coverage that a base truck does not, so tire advice for one does not transfer cleanly to the other. Trail Boss trucks carry a factory lift and an off-road tire, which changes the starting point too.
The reliable source for your truck is the tire placard on the driver's door jamb plus the size molded into your current tire sidewall. Write down the overall diameter, the section width, and the wheel width. Everything below is a step up from that number. If the size code still looks like a puzzle, our guide to reading a tire sidewall covers every part of it.
Stock height: how big can you go without a lift?
On an unlifted Colorado, the easy step is one size up from factory, which usually lands between 30 and 31 inches. You gain a little ground clearance and a more capable tread, the speedometer error stays small, and nothing needs cutting. Plenty of owners stop here because it keeps the truck quiet on the highway and keeps the front end happy.
The trouble starts when you try a 32 or 33 on a truck at stock height. The tire finds the same spots every time: the plastic liner and the lower front valance at full steering lock, and the leading edge of the rear wheel opening when the suspension compresses. Trimming plastic works, but if you already know you want 33s, buy the lift first and the tires second.
Leveling kit or small lift: where most Colorado builds land
This is the sweet spot for a daily-driven Colorado. The factory stance leaves the front slightly lower than the rear, and a leveling kit or a modest lift evens that out while giving the front tire room to steer and cycle. With that room, 32 and 33 inch tires fit with little or no cutting, the truck sits level, and the tire fills the wheel opening the way you expected it to.
Plan for the side effects before you order tires:
- The speedometer reads slow, so recalibrate it or every mile you drive gets under-counted.
- Alignment shifts after a lift, which we explain in our alignment guide.
- Braking and fuel economy both change with a taller, heavier tire, covered in brake upgrades after bigger tires and fuel economy after mods.
Our Chevy Colorado lift kit guide compares the leveling, strut spacer, and full lift routes, and you can browse the lift kits collection to see what is available. If you are still deciding what to change first, the Colorado and Trail Boss mod guide puts tires in the context of the whole build.
35 inch tires: what else has to change
A 35 inch tire on a Colorado is a package, not a swap. Expect a lift of several inches, trimming at the front and rear of the wheel openings and around the lower bumper, and careful attention to how the front control arms, steering linkage, and sway bar sit relative to the bigger tire. Many builders add stronger or longer-travel suspension at the same time, because a heavy tire on stock springs and shocks rides poorly and wears parts out early.
The payoff is real: more clearance under the axles and a longer contact patch when you air down. The cost is real too, and the biggest hidden one is gearing. A midsize truck is not geared for a tire that tall, so the engine turns slower at highway speed, the transmission hunts for gears, and the truck feels sluggish off the line. That is why many 35 inch builds get a regear, which we cover in regearing after bigger tires. Ring and pinion sets live in our gearing collection.
Wheel width and offset matter as much as diameter
Two Colorados wearing the same tire can behave very differently because the wheels differ. The front suspension is independent, so the tire moves on control arms, and the gap between the tire and those arms changes as the wheel turns and the suspension cycles. Wheel width and offset set where the tire sits in that space.
Pushing the tire outward with a lower-backspacing wheel helps it clear the arms and steering parts, but it moves the tire toward the fender edge and adds leverage on the bearings and ball joints. Tucking it inward does the opposite. There is no free answer, so choose a wheel inside the tire maker's recommended rim width range and test clearance at full lock and full compression. Our explainer on wheel offset and backspacing breaks the numbers down, and if you change wheels, read TPMS and aftermarket wheels so the sensors are not an afterthought.
Skip wheel spacers as a shortcut when you can. They work in some cases, but they add leverage on the hub and one more part that can fail. We lay out the tradeoffs in are wheel spacers safe.
Choosing the tire itself
Size is half the decision. The other half is what the tread does. All-terrain tires suit a Colorado that spends most of its life on pavement and weekends on trails. Mud-terrain tires grip better in loose, wet ground, but they are louder, wear faster on the street, and can feel vague at highway speed. If you are on the fence, our comparison of mud-terrain versus all-terrain tires lays out the tradeoff plainly.
Load range matters on a midsize truck. A heavy load range E tire has stiff sidewalls that ride rough and take longer to air down smoothly, and a Colorado with a light bed load rarely needs one. Match the tire to what you actually carry, and learn to air down properly with our guide to airing down tire pressure, since a bigger tire has more to gain from it.
Where a Colorado usually rubs, and what fixes it
Rubbing follows patterns. At full lock, the front tire touches the inner liner, the lower valance, or a suspension part. At full compression, it reaches the back of the front wheel opening. Loaded, the rear tire can find the body, the bumper corner, or the bump stop.
Match the fix to the spot. Steering stops and a different wheel width or offset handle contact at lock. Bump stop spacers or a firmer spring handle compression rub. Trimming plastic liners costs nothing and takes minutes. Cutting sheet metal is the last resort, because it invites rust unless the edge is sealed and painted. If you are cutting a lot, a smaller tire or a different wheel is usually the better answer. Our guide to how big of a tire will actually fit explains how to test clearance on any truck.
What a taller tire does to your speedometer and gearing
Every extra inch of diameter is a small change to your final drive ratio. Go from a 31 inch tire to a 33 or 35 and the engine turns slower at the same road speed, which sounds like a gain until you feel it. Lower revs mean less leverage at the wheels, so the truck feels heavier off the line, downshifts more on grades, and needs more throttle to hold speed.
The speedometer error is easy to estimate: divide the new diameter by the old one. A tire that is ten percent taller makes the speedometer read about ten percent low, so a true 66 miles per hour shows as 60. Fix it with a recalibration, because an honest speedometer matters for tickets, for towing, and for service intervals that run on mileage. If you tow with your Colorado, read towing a trailer offroad before you pick a tire that dulls low-end pull.
A simple checklist before you buy
- Read the door jamb placard and the tire sidewall for your current size and wheel width.
- Pick a target diameter: 30 to 31 for stock height, 32 to 33 with a leveling kit or small lift, 35 only with a full package.
- Choose a wheel width and offset inside the tire maker's rim width range that clears the control arms.
- Plan the supporting work: alignment, speedometer recalibration, and gearing if you go above 33.
- Test fit one wheel and tire at full lock and full compression before you buy a full set.
That last step costs an afternoon and can save a few hundred dollars in mounting fees when a tire turns out to rub.
Frequently asked questions
What is the biggest tire I can put on a stock Chevy Colorado?
Most stock-height Colorados take a tire around 30 to 31 inches without rubbing. Some owners squeeze in a 32 with trimming, but fit depends on your trim, wheel offset, tire width, and how much you steer at full lock. Test one tire before buying a set.
Do I need a lift to run 33 inch tires on a Colorado?
Not strictly, but a leveling kit or small lift makes it much easier and reduces trimming. A tall, wide tire on a stock-height truck is the combination most likely to rub, especially at full steering lock.
Do I need to regear a Colorado for bigger tires?
For 32s and 33s, most owners do fine without it, though highway fuel economy drops. For 35s, regearing is strongly recommended because acceleration and highway shifting both suffer.
Will bigger tires change my speedometer?
Yes. A taller tire covers more ground per revolution, so the speedometer reads lower than your true speed and the odometer under-counts miles. A recalibration or tuner correction fixes it.
Ready to size up your Colorado?
Decide on the stance first, then match the tire and wheel to it. Browse our tire collection and wheels and tires to build a setup that fits your truck and the way you drive it.
Related reading
- Chevy Colorado Lift Kit Guide — the lift options that make bigger tires fit.
- Chevy Colorado and Trail Boss Mod Guide — where tires fit in the build order.
- Toyota Tacoma Tire Size Guide — the same tire sizing logic on its closest midsize rival.
- Chevy Colorado Wheel Size and Offset Guide — once the tire is chosen, match the wheel width and offset to it.
- Chevy Colorado Shocks: How to Pick the Right Ones for Your Lift and Trails — the shock sizing that goes with bigger tires and a lift.
- Chevy Colorado Regear Guide — whether the tires you picked need new gears to match.
